ABS vs PVC Pipes – What’s the DifferenceBetter Choice?

PVC pipes are widely used for plumbing purposes because they are affordable, durable, and flexible. They are also resistant to corrosion and are relatively inexpensive. On the other hand, ABS pipe has become very popular due to its durability, flexibility, and resistance to damage. Which type should you choose?

There are two types of plastic piping materials available today: polyvinyl chloride (PVC) and acrylonitrile butadiene styrene (ABS). Both are commonly used in home construction projects. The choice between these two materials depends on several factors such as cost, ease of installation, and performance.

Both PVC and ABS are good choices for residential plumbing applications. In general, ABS is better suited for high-pressure applications, whereas PVC is better for low-pressure applications. If you want to install a new water line or replace old pipes, consider using either PVC or ABS.

What is the Difference Between ABS and PVC Piping?

The main difference between PVC and ABS piping systems is that PVC is more rigid than ABS. This means that it will withstand higher pressures without leaking. However, this comes at a price.

16,954 Pvc Pipe Stock Photos and Images - 123RF

One major drawback of PVC piping is that it is much more expensive than ABS piping. It can be difficult to find an installer who will offer competitive pricing for PVC piping systems.

Another advantage of ABS piping is that it is easier to cut and shape. For example, if you need to make a custom fitting, you can easily do so with ABS piping.

If you have any questions about which type of plastic piping material would work best for your project, contact us today! We can help you figure out what works best for your needs.

The Difference between ABS and PVC Pipes

PVC pipes are commonly used in plumbing systems because they are durable, flexible, and resistant to chemicals. But did you know that ABS (acrylonitrile butadiene styrene) pipes are also widely used in construction projects? Which type of pipe should you choose?

ABS pipes are often preferred over PVC pipes due to their durability, flexibility, and resistance to chemicals. They are also easier to cut and weld.

Here’s a quick comparison between ABS and PVC pipes.

1. Durability

ABS pipes are stronger than PVC pipes. They can handle higher pressure and temperature levels. Also, they’re less likely to crack when exposed to harsh conditions like extreme heat or cold.

2. Flexibility

ABS pipes are more flexible than PVC pipes. You can bend them into almost any shape. Plus, they’re easy to cut and weld. This makes them ideal for use in tight spaces.

3. Resistance to Chemicals

ABS pipes are resistant to chemicals. They won’t leach harmful substances into the environment.

4. Cost

ABS pipes are generally cheaper than PVC pipes. So, if you’re looking for a long-lasting solution, then you might want to consider buying ABS pipes.

5. Installation

You don’t need special tools to install ABS pipes. All you need is a hacksaw and some cutting pliers. With PVC pipes, however, you’ll need a torch and other specialized tools.

6. Safety

Because ABS pipes are made from safer materials, they are considered safer than PVC pipes. They won’t burn or melt when exposed to fire.

Applications of ABS Piping

There are many different types of plumbing applications where ABS pipes are great options. Here are just a few examples:

• Fire sprinkler system

• Water supply lines

• Sewer lines

• Storm drains

• Shower and bath tub installations

• Hot water tanks

• Drainage systems

• Swimming pool liners

• Industrial piping

• HVAC ductwork

Uses for PVC Pipes

While ABS pipes are better suited for certain applications, there are still plenty of uses for PVC pipes. Here are just a couple of examples:

• Water storage tank

• Dumpster lining

• Waste disposal line

• Faucet installation

• Toilet flushing

• Sink drain

• Pool filter

• Pipe insulation

• Pipe repair

How to Join ABS and PVC Piping?

When joining two pieces of tubing together, you will first need to determine whether the ends of the pipes are smooth or threaded. Smooth ends are not threaded, while threaded ends are. If one end is threaded, you must drill a pilot hole before inserting the second piece of pipe.

If both ends are smooth, you can simply insert the second piece of pipe by pushing it into the first piece with a hammer or mallet.

If one end is threaded, then you will need to drill a pilot hole before connecting the two pieces of pipe. The best way to do this is to use a power drill fitted with an appropriate sized bit.

Once the pilot holes have been drilled, you can connect the two pieces of pipe using a coupling nut. It should be noted that the threads on the inside of the pipe should face towards each other.

The most common type of coupling used for joining plastic pipes is called a compression fitting. This kind of connection works well for short lengths of pipe.

When to Use ABS vs. PVC

In general, ABS pipes are better choices for outdoor applications because they are more durable. However, PVC pipes are often preferred indoors because they are easier to work with.

If you would like to read about the pros and cons of each material, then check out our article on which material is better for your home.

Installation Process for ABS vs. PVC

Both materials require similar installation processes. You will first need to cut off any old fittings at the ends of the pipes. Then, you will need to clean up the surface of the pipes. Finally, you will need to prepare the surfaces that the pipes will be connected to.

For ABS pipes, you will typically need to sand down the rough edges of the pipes. For PVC pipes, you will need to grind down the rough edges of both the interior and exterior surfaces of the pipes.

You will also need to apply some type of primer to the surfaces that the pipes are going to be attached to.

After the priming process has been completed, you can attach the pipes to each other using either a compression fitting or a hose clamp.

How to choose between PVC and ABS?

PVC pipes are widely available in all sizes and shapes. They are easy to install and come in many different colors. Because of these advantages, they are often the choice for indoor plumbing.

Difference between PVC cPVC uPVC and PEX - YouTube

However, if you want something a little more durable than standard PVC pipes, then you might consider choosing ABS pipes instead. These pipes are made from polyethylene terephthalate (PET) and are much stronger than regular PVC pipes.

Because of their strength, they are commonly used for commercial purposes such as water tanks and irrigation systems.

Because of their durability, they are also popular for outdoor uses including garden hoses and fire sprinkler lines.

Conclusion

There are several factors to take into consideration when deciding between PVC and ABS pipes. In general, ABS pipes are more durable than PVC pipes. However, PVC pipes tend to be less expensive.

If you would prefer to learn more about the differences between PVC and ABS pipes, then please visit our website today! We hope that we were able to help you make the right decision.

Similar Posts

Leave a Reply

Your email address will not be published.